-
1. Define the system architecture before opening a lithium battery catalog
-
2. Read the PV module specification guide beyond the wattage
-
3. Use usable energy from the lithium battery catalog, not nominal energy
-
4. Verify certifications by certificate number, not by name
-
5. Treat the warranty as a contract, not as a slogan
-
6. Map the OEM and private-label boundary before you sign
-
The total-cost view
-
What turns into an emergency call
Sonnen may be known as the German energy storage company behind smart home batteries. In B2B circles, the Sonnen company is also an energy storage system OEM, a wholesale supply partner and a source of private-label offerings. In my role coordinating B2B supply and rush validation for solar-plus-storage projects, I have reviewed enough lithium battery catalogs and PV module spec guides to know where procurement decisions go wrong.
This checklist is for distributors, OEM buyers, wholesale partners and engineers who approve equipment before it reaches a project. If you are evaluating two or three BESS suppliers, the six checks below will tell you whether you are comparing real offers or just marketing pages. Step four is the one that causes the longest delays, so do not skip it even if you are in a hurry.
1. Define the system architecture before opening a lithium battery catalog
Battery cells do not set project timelines; system architecture does. A DC-coupled storage system and an AC-coupled storage system can show similar capacity numbers, but they behave differently at the point of interconnection, under a grid outage, and when the PV array is already installed.
Before you compare quotes, answer four questions: Is this an AC-coupled or DC-coupled system? Does the battery need an external inverter or is it integrated? What is the voltage and communication interface between the battery and inverter? And who decides when the battery charges or discharges?
Sonnen offerings are usually integrated systems rather than bare cells. That simplifies architecture, but it does not remove the question. It shifts the responsibility to the manufacturer, which is how it should be in an OEM relationship.
2. Read the PV module specification guide beyond the wattage
If the offer includes solar panels, do not let the first number on the datasheet end the review. The PV module specification guide contains the information that actually determines seasonal performance: NOCT or NMOT power, temperature coefficient of Pmax, voltage at maximum power, open-circuit voltage at low temperature, mechanical dimensions and degradation terms.
In a solar-plus-storage system, the module string and battery charging profile must fit together. More than once, a delayed project was caused by a string that was perfectly sized using STC but operated outside the inverter's MPPT window on cold mornings. The datasheet includes those values. Go to that page.
If a quote says Sonnen solar panels, ask for the module model number and its full spec sheet in the quote. A brand name is not a specification.
3. Use usable energy from the lithium battery catalog, not nominal energy
No one intentionally buys nominal capacity; it just happens when the catalog headline uses it. Often a lithium battery catalog shows nominal energy in the marketing section and usable energy in a much quieter table. The difference between the two can be 10 to 15 percent, enough to change a financial model.
Ask for these numbers before you calculate a price per stored kWh:
- usable energy range at the inverter terminals, not the cell stack
- maximum continuous charge and discharge power
- peak power duration, if relevant
- round-trip efficiency under the expected operating profile
- operating temperature range and any power derating outside 25 C
This is where total cost thinking starts. A 20 kWh system that only permits 18.5 kWh usable is not the same asset as one that permits 19.5 kWh, even if the price is the same. On a portfolio, that difference is a real cost.
4. Verify certifications by certificate number, not by name
Certification issues are the hardest to fix in an emergency. A missing label can stop a shipment at customs, and an uncertified energy storage system cannot be installed. Do not rely on a certificate logo printed in a brochure. Ask for the certificate number and check the database of the testing organization that issued it.
The specific list depends on the target market. In North America, system-level UL 9540 or UL 9540A evidence, inverter certification under UL 1741, grid interconnection testing under IEEE 1547, and module certification under UL 61730 or IEC 61215 are typical. In Europe, ask for the relevant IEC or EN standards and the Declaration of Conformity. As of January 2026, these lists are still changing, so treat them as starting points rather than final compliance advice.
The idea that one international certificate covers every market comes from an era when batteries were consumer components. Stationary storage is regulated as a system because it connects to the grid and can interact with building electrical networks. One certificate is rarely enough.
For the U.S. market, also review environmental claims. According to the FTC Green Guides at ftc.gov, a product described as recyclable should be recyclable in areas where at least 60 percent of consumers have access to recycling facilities. If a supplier says the battery is recyclable, ask what portion, through which program, and in which regions. That is not a side issue; it is part of spec review.
5. Treat the warranty as a contract, not as a slogan
Battery lifetime is not one number. It depends on throughput, temperature, depth of discharge and how often the system sits at high state of charge. A warranty that mentions cycles, years and capacity retention must be read as one document. The cell might be rated for 10,000 cycles at shallow depth of discharge, while the full system warranty covers 6,000 cycles to 70 percent capacity. Both statements can be true; the second one is the one that protects the project.
When I compare energy storage system OEM quotes, I highlight the warranty clauses that get ignored in commercial reviews:
- Which limit expires first, calendar years or throughput?
- What is the end-of-warranty capacity threshold?
- Who measures capacity and what test procedure is used?
- Are software updates included or sold separately?
- Who pays freight and labor if an inverter module needs replacement?
- Is the original manufacturer warranty transferred to the end customer if you private-label?
Looking back, I should have asked for unit-level replacement terms before signing one of our first private-label contracts. At the time, the warranty summary looked sufficient. The first claim taught me that a battery warranty and an inverter warranty can have different response times. I do not want to repeat that lesson.
6. Map the OEM and private-label boundary before you sign
Energy storage system OEM is a broad phrase. It can mean bulk hardware supply, custom SKUs, white-label distribution, software branding, or a complete private-label product. The commercial and regulatory responsibilities are different for each model, so the agreement should define what is included and, just as important, what is not included.
- Which product labels, packaging, software screens and manuals can carry your brand?
- Are certificate amendments required for private-label markings? Who files them?
- If an end customer calls with a warranty issue, do they call you or the original manufacturer?
- Does the partner provide a documented API or open protocol such as Modbus and SunSpec?
- Who receives operational data, and can the customer export it after the contract ends?
- What is the spare parts commitment, including end-of-life?
Sonnen has invested in OEM and private-label flexibility, and that is one reason it appears in B2B conversations. But even with a mature partner, the boundary has to be documented. The most expensive questions in an OEM project are the ones you ask after production begins.
The total-cost view
If this list feels like a lot of paperwork, remember what it is trying to prevent. A unit-price saving can disappear in certificate amendments, rush freight, commissioning trips, software access payments and warranty friction. In the projects I have reviewed, the lowest-priced quote on the first line was rarely the lowest total cost. It is not enough to compare the lithium battery catalog price; compare the full set of obligations.
What turns into an emergency call
The surprises that generate emergency calls usually fit a pattern:
- sizing models use nominal capacity instead of usable capacity
- private-label markings are assumed to be a simple sticker update
- PV array voltage is checked at standard test conditions but not at cold temperatures
- software integration work is discovered during commissioning rather than during contract negotiation
No checklist can eliminate every equipment failure. But these four causes are avoidable if you review the spec guide before you place the order. That is the payoff: fewer midnight phone calls and a project schedule that is not being held together by good luck.