-
Who This Checklist Is For
-
The 12-Point Sourcing Checklist
-
1. Define Your Specs Before You Talk to Anyone
-
2. Verify They're Actually a Manufacturer (or a Legitimate Distributor)
-
3. Ask About Cell Sourcing (and Get It in Writing)
-
4. Get the Certification Documents—Not Just the Certificates
-
5. Read the Warranty Fine Print (Twice)
-
6. Understand Their Minimum Order Quantity and Lead Time
-
7. Request Factory Test Reports
-
8. Confirm Shipping and Logistics Handling
-
9. Review Payment Terms Carefully
-
10. Check Software and Monitoring Capabilities
-
11. Ask for References—and Actually Call Them
-
12. Do a Final Spec-to-Product Cross-Check
-
1. Define Your Specs Before You Talk to Anyone
-
Common Mistakes to Avoid
Who This Checklist Is For
If you're the person who gets handed the task of "figure out our energy storage options"—and you're not an electrical engineer—this is for you.
I'm the office administrator at a 180-person renewable energy installation company. I manage all procurement: roughly $1.2M annually across 11 vendors, including our BESS and solar panel sourcing. I've evaluated 14 energy storage suppliers—some manufacturers, some distributors—and I made a $3,400 mistake on my first order that I could have avoided with about five minutes of verification.
This checklist takes 60–90 minutes to work through properly. Step one alone will take half that time, but it's the step that saves you the most money downstream.
The 12-Point Sourcing Checklist
1. Define Your Specs Before You Talk to Anyone
This is the step most people skip (I did, and I paid for it). Before you email a single vendor, write down three things:
- Your target capacity (kWh) and power (kW). Not "about 100 kWh"—an actual number based on your load profile or your client's requirements.
- Your inverter compatibility requirements. What brand and model? Does the BESS need to communicate via Modbus, CAN bus, or something proprietary?
- Grid-tied, off-grid, or hybrid? This single answer eliminates about 40% of suppliers immediately.
Here's something distributors won't tell you: they love buyers who don't know their specs. It lets them sell whatever's sitting in their warehouse rather than what you actually need.
I learned this one the hard way—the first quote I accepted had about 80% compatibility with our existing inverter setup. "Compatible" in battery terms meant we needed an additional $3,400 communication gateway to make it work. That was an expensive lesson.
2. Verify They're Actually a Manufacturer (or a Legitimate Distributor)
There's a difference between a manufacturer, an authorized distributor, and a trading company that slaps its logo on someone else's product. All three exist in the BESS space. Two of them can be fine. One of them is a problem.
How to check:
- Ask for their factory audit report or ISO 9001 certificate. A real manufacturer has one. A trading company will hesitate.
- Request a live video walkthrough of the production line. This is a reasonable ask. If they refuse or keep rescheduling, that tells you something.
- Check whether they're listed as an authorized distributor on the manufacturer's website. If they claim to distribute for a major brand (say, for lithium cells from CATL or EVE), verify it directly with the manufacturer.
What most people don't realize is that some "distributors" are simply buying cells from one factory, assembling packs in a garage, and calling themselves manufacturers. That's not always a dealbreaker—but you need to know which one you're dealing with so you can calibrate your quality expectations.
3. Ask About Cell Sourcing (and Get It in Writing)
The cells are the most expensive component of any BESS. Where they come from matters more than almost anything else on this list.
Ask specifically: "Which cell manufacturer do you use, and are they Grade A, B, or C cells?"
Grade A cells are the ones that passed all factory tests. Grade B are slightly out of spec but still functional. Grade C are typically recycled or heavily degraded. Some suppliers will say "we use Grade A" without specifying the source—push for the actual manufacturer name.
Also ask: "Who provides the BMS?" A battery management system from a reputable source (Daly, REC, or the cell manufacturer's own BMS) is a good sign. A no-name BMS is a risk you'll feel six months in.
4. Get the Certification Documents—Not Just the Certificates
Everyone claims to have "all the certifications." Very few will email you the actual documents without you asking twice.
For BESS products, the key standards are:
- IEC 62619—Safety requirements for industrial lithium batteries
- UL 9540—Energy storage system safety (required for North American installations)
- IEC 62477—Power electronic converter systems safety
- UN 38.3—Transportation safety for lithium batteries
- CE marking—For EU market access (but verify the specific directives it covers)
Ask for PDF copies of the actual test reports, not just a certificate cover page. Check that the model number on the certificate matches the model you're ordering. I've seen certificates that were issued for a completely different product configuration.
This information was accurate as of Q1 2025. Standards get updated, so verify current requirements with the relevant certification body for your market.
5. Read the Warranty Fine Print (Twice)
"10-year warranty" sounds great until you read the conditions. Here's what to look for:
- Throughput limitations. Some warranties specify maximum annual cycles or total energy throughput. Exceed it, and your warranty is void.
- Temperature conditions. If the warranty is void above 35°C ambient, and you're installing in Southern Europe, that's a problem.
- Who pays for shipping? A warranty that requires you to ship a 500 kg battery back to China at your own cost is not a warranty you want.
- End-of-warranty capacity guarantee. A good warranty guarantees at least 70% capacity retention at end of term. Some guarantee 60%. That 10% matters over a 10-year period.
Ask them to put the warranty terms in the contract, not just in a brochure. If they won't, that's a red flag.
6. Understand Their Minimum Order Quantity and Lead Time
MOQs in the BESS space range from 1 unit to 100+. Make sure you know the exact MOQ for your target product before you start negotiating price.
Lead times are trickier. "Standard lead time is 4–6 weeks" often includes buffer time that suppliers build in to manage their production queue. It's not necessarily how long your order will take. Ask specifically: "For an order placed today, what's the realistic delivery date?"
If I remember correctly, our shortest lead time on a 50 kWh unit was about five weeks. But our longest was closer to eleven weeks—because the cells were backordered and nobody told us until the fourth week.
7. Request Factory Test Reports
Before anything ships, you should receive:
- Capacity test report (actual measured kWh, not nameplate)
- Charge/discharge curve data
- Insulation resistance test
- BMS functional test
These should be signed and dated for your specific unit serial numbers. Not a sample report from six months ago. If a supplier can't provide unit-specific test data, that's a sign of either poor quality control or poor documentation—neither is reassuring.
8. Confirm Shipping and Logistics Handling
Lithium batteries are classified as dangerous goods for shipping. This means:
- They require UN 38.3 testing documentation
- Sea freight needs proper Class 9 dangerous goods declaration
- Some shipping lines won't carry them
- Air freight is extremely expensive for units above a certain size
Confirm who handles the dangerous goods documentation. If it's on you, budget for a freight forwarder who specializes in lithium battery shipments. If it's on them, get that in writing.
9. Review Payment Terms Carefully
Typical B2B payment terms for energy storage orders fall into a few categories:
- 30/70: 30% deposit, 70% before shipment (most common)
- L/C at sight: Letter of credit, safer for large orders
- Net 30: Rare for new supplier relationships, more common after 2+ years
What most people don't realize is that the first quote is almost never the final price. There's usually room for negotiation, especially if you're placing a repeat order or committing to volume over time. Just don't push so hard on price that they cut corners on cells to compensate.
10. Check Software and Monitoring Capabilities
If you're sourcing sonnen solar panels or any integrated system, the software layer matters as much as the hardware. Ask:
- Does the monitoring platform have an API? (If you want to integrate with your existing systems, this is essential.)
- Is there a local data logging option, or is everything cloud-dependent?
- What happens if the manufacturer goes bankrupt? Does the system still function locally?
- Are firmware updates automatic or manual?
I've only worked with cloud-based monitoring platforms. I can't speak to how on-premise solutions compare in terms of reliability and maintenance overhead.
11. Ask for References—and Actually Call Them
Every supplier will give you references. Most references will be happy customers. So the goal here isn't to find a bad reference—it's to ask the right questions:
- "What failed or went wrong in your first year?"
- "How quickly did they respond to your support tickets?"
- "Would you order from them again at the same price point?"
- "Did the actual capacity match the rated capacity?"
If a reference is hesitant to answer any of these, that's your answer.
12. Do a Final Spec-to-Product Cross-Check
Before you sign the purchase order, go through one more time:
- Model number matches the certification documents
- Capacity and voltage match your requirements
- Communication protocol matches your inverter
- Warranty terms are in the contract (not just the brochure)
- Delivery date is realistic (add 2 weeks to whatever they quote)
- Payment terms are clear
Five minutes of verification beats five days of correction. I now keep a folder with all supplier documentation for every order. When something goes wrong six months later, I have everything in one place.
Common Mistakes to Avoid
Don't skip the certification verification. It's the single most important step. I've seen shipments get held at customs because the UN 38.3 test report was expired or didn't match the actual cell configuration.
Don't assume "standard" means anything. Ask for explicit specs for every item. "Standard" is a word that vendors use when they don't want to commit to specifics.
Don't skip the reference calls. It takes 20 minutes and can save you months of headaches. The 12-point checklist I built after my first mistake has saved us an estimated $8,000 in potential rework across subsequent orders.
Don't treat price as the primary decision factor. The cheapest quote almost always has a hidden cost somewhere—inferior cells, shorter warranty, or worse support. Focus on total cost of ownership over the system's lifetime.
The main limitation of my experience is that it's based on about 14 supplier evaluations, mostly in the European market. If you're sourcing for a different region or from a different tier of suppliers, your experience might differ. But the verification principles hold regardless of geography.